O-rings and seals can be counted automatically with an image-based counting machine, which counts each ring as a separate object instead of estimating from weight. The challenges are specific to seals: they are light, flexible, often lubricated or static-prone so they cling together, and they come in colors and materials that can be hard to see against a background. Lighting, feeding and image analysis set up for your seals solve most of these.
This article is part of our automated counting guide. It is written for seal distributors, kitting operations and manufacturers who count O-rings, gaskets, washers and similar parts.
In short
- Weight counting struggles with seals because they are so light.
- Clinging, nesting and lubricated rings are the main counting problems.
- Contrast between the seal and the background decides what a camera can see.
- Test your seal sizes, colors and materials before committing.
Why O-rings are hard to count
| Challenge | What happens | How it is handled |
|---|---|---|
| Very low piece weight | Small seals weigh a fraction of a gram, so weight counts lose resolution | Count each piece by image instead of weight |
| Clinging and clumping | Lubricant or static makes rings stick together | Feeding that separates rings; image analysis that splits touching rings |
| Nesting | Smaller rings sit inside larger ones, or rings stack | Controlled feed rate; counting from more than one view |
| Color and contrast | Black rings on dark surfaces, clear or translucent seals | Backlighting and lighting chosen for the material |
| Flexibility | Rings deform and change shape as they fall or lie | Image analysis based on the ring, not a fixed outline |
Which counting approach fits
- Drop zone counting (PerfectCount): rings fall through an imaging zone and are counted in flight; suits bulk counts and bagging.
- Benchtop snapshot counting (BenchCount): an operator spreads seals on a tray and counts them from one image; suits mixed sizes and small batches.
- Conveyor counting (ConveyorCount): counts seals moving on a belt, inline with other steps.
For how weight counting compares, see counting scales vs automated counting, and for touching parts in general see counting overlapping and touching parts.
Before you automate seal counting
- List your seal sizes, cross-sections, materials and colors.
- Note which are lubricated or packed in oil.
- Pick your batch sizes and how counted seals are bagged or kitted.
- Send real samples, including the hardest sizes, for a counting test.
Counting O-rings by hand or by weight?
Send us your seals for a free counting test. Sciotex counting machines count every piece, store a record of each count, and let your team train new part types themselves.
Frequently asked questions
Yes. Image-based counting machines count each O-ring as a separate object, with lighting and feeding set up for the seal size, color and material.
Small seals are so light that weight counts lose resolution, and piece weight varies between lots, so weight estimates can be off on large counts.
Feeding is set up to separate rings, and image analysis can split touching rings; lubricated or static-prone seals should be tested first.
Usually, with backlighting or lighting chosen for the material so each ring contrasts with the background.
Drop zone counters suit bulk counts and bagging, benchtop snapshot counters suit mixed sizes and small batches, and conveyor counters suit inline counting.