An automated count-and-bag system counts each part type to the exact quantity and releases it straight into a bag, box or kit compartment, so kits are complete without hand counting. A counting machine handles the count, a bagger or kit line handles the packaging, and the two are linked so each bag receives exactly one counted batch, with a record and a label for each.
This article is part of our automated counting guide. It goes deeper than our bulk and batch counting article on the kitting side: multi-part kits, bagging and kit verification.
In short
- Count each part type exactly, then bag; don’t estimate by weight.
- Link the counter to the bagger so one counted batch goes into one bag.
- For multi-part kits, count each part type and verify the kit before it seals.
- Print the label from the count record, not from the order.
Common kitting setups
| Setup | How it works | Best for |
|---|---|---|
| Counter into hand-held bag | Operator holds the bag under the counter’s release | Low volume, many part numbers |
| Counter feeding a bagger | Counter releases each batch into an automatic bagger that seals and labels | High volume, single-part bags |
| Several counters into one kit | Each counter handles one part type; a kit moves past each station | Multi-part hardware kits |
| Count then verify | Parts are counted, then the finished kit is checked before sealing | Aerospace, medical and other kits that need proof |
Linking the counter to the bagger
- Handshake: the bagger signals “ready”, the counter releases one batch, the bagger confirms and seals. No batch is released without a bag in place.
- Batch size from the order: the target count comes from the work order or ERP, so changeovers don’t depend on retyping numbers.
- Labels from the count: the label printer prints the verified quantity, part, lot and date for each bag.
- Rejects and short batches: if a batch can’t be completed, the system stops and flags it rather than sealing a short bag.
Sciotex counting machines connect to baggers, label printers, scales, ERP and WMS; see connecting a counting machine to ERP, WMS and packing equipment.
Kit accuracy: where errors still get in
- A part type missed entirely, especially in kits with many components
- Wrong part in the right quantity, such as a similar-looking screw
- Parts stuck in the feed path and released into the next bag
- Manual top-ups when a batch runs short
Counting each part type at its own station and checking the finished kit closes most of these gaps. Where a wrong part is the risk, vision can check part identity as well as count; see error proofing with machine vision.
Sizing the system
- Bags or kits per hour at peak, and how many part types per kit
- Part sizes and how they behave: tangling, static, rolling, touching (see counting overlapping and touching parts)
- Bag or kit format and the bagger you have or plan to buy
- What records customers require for each kit
Hand counting kits?
Send us your parts for a free counting test. Sciotex counting machines integrate with baggers, label printers and your ERP, keep a record of every count, and are built and supported in the US.
Frequently asked questions
A count-and-bag system counts parts to an exact quantity and releases each counted batch into a bag or kit, usually linked to an automatic bagger and a label printer.
Yes. The counter and bagger exchange ready and release signals so each bag receives exactly one counted batch, and the label can print the verified count.
Use a counting station for each part type, or count each part type in sequence, and verify the finished kit before it is sealed.
Weighing works for uniform parts, but piece-weight variation can cause short or over-filled bags. Counting each piece removes that error.
It depends on part size and bag format. The counter is rarely the limit; bagger cycle and part feeding usually set the pace.