Plastic and molded parts can be counted exactly with an image-based counting machine, even when they are too light, too varied or too static-prone for a counting scale. The usual challenges are parts that cling from static, tangle, nest inside each other, or are clear or colored like the background, and runners or flash that should not be counted as parts.
This article is part of our automated counting guide. It is written for molders, assemblers and distributors who count molded components, caps, clips, plugs and other plastic parts.
In short
- Light plastic parts are a poor fit for weight counting.
- Static, tangling and nesting are the main counting problems.
- Size and shape limits keep flash, runners and fragments out of the count.
- Test real parts from a production run, not clean samples.
Common challenges with molded parts
| Challenge | How it is handled |
|---|---|
| Low piece weight and variation between cavities | Count each piece by image instead of weight |
| Static cling | Feeding and surfaces chosen to reduce cling; parts separated before counting |
| Tangling (clips, springs, hooks) | Gentle separation at the feed; counting from more than one view |
| Nesting and stacking (caps, cups) | Feed rate control; image analysis that detects stacked parts |
| Clear or color-matched parts | Lighting chosen for the material, often backlighting |
| Flash, runners and fragments | Size and shape limits so only whole parts count |
Where molded part counting is used
- Packing parts off the press into bags or boxes by count
- Building kits that include plastic components
- Verifying counts from molding suppliers at receiving
- Counting medical and electronic molded components; see medical device component counting and electronic component counting
Choosing a counting approach
Drop zone counting suits bulk counts and bagging; benchtop snapshot counting suits small batches and mixed parts; conveyor counting suits parts already moving on a line. See counting technologies compared for how image-based counting compares with scales, sensors and feeders, and counting overlapping and touching parts for the separation problem in detail.
Counting molded parts by weight?
Send us parts from a production run for a free counting test. Sciotex counting machines count every piece, store a record of each count, and let your team train new part types themselves.
Frequently asked questions
Yes. Image-based counting machines count each plastic part as a separate object, with feeding and lighting set up for the material and shape.
Plastic parts are light and piece weight varies between cavities and runs, so weight-based estimates lose accuracy on large counts.
Feeding and contact surfaces are chosen to reduce cling, and parts are separated before they are counted.
Size and shape limits in the image analysis keep fragments, flash and runners out of the count.
Usually, with lighting such as backlighting chosen so clear parts contrast with the background. A test with real parts confirms it.