Counting Medical Device Components With Lot Records

Written by Sciotex Engineering
In this article

Medical device manufacturers count components exactly and tie every count to a lot, because a wrong quantity in a kit, tray or production batch is both a quality problem and a records problem. An automated counting machine counts every piece of small components such as syringe parts, seals, connectors and molded parts, and stores each count with the part, lot, work order, time and operator, so the count becomes part of the batch record.

This article is part of our automated counting guide. It is written for manufacturing and quality engineers in medical device production. Sciotex has delivered systems to medical device manufacturers and builds counting machines designed, programmed, built and supported in the US.

In short

  • Count every piece; weight estimates are hard to defend in a batch record.
  • Tie each count to the lot and work order automatically.
  • Validate the counting process for its intended use and verify it routinely.
  • Plan for cleanliness: how parts are handled, and what touches them.

Where counting shows up in medical device production

PointWhy the count matters
Receiving of small componentsConfirms supplier quantities before parts enter controlled stock
Kit and tray assemblyEvery kit must contain exactly the specified components
Production batchesBatch quantities must match the record for reconciliation
PackagingUnit counts per package must match the label

What a counting record should include

  • Part number, lot and work order
  • Target and counted quantity
  • Time, operator and counting station
  • Counter verification status for that shift
  • Any rejected or recounted batch, with the reason

Counts stored this way can be passed to your ERP or manufacturing records system; see connecting a counting machine to ERP and WMS.

Validation and verification

In regulated production, equipment used to make quality decisions is expected to be qualified for its intended use. For a counting machine that usually means documented installation checks, operational tests with reference batches, a performance demonstration at production rates, and routine verification afterward. Our guide to validating an automated counting system walks through each step, and verifying count accuracy covers how many parts to count to prove an error rate. Your own quality system defines the exact requirements.

Handling medical components

  • Contact surfaces: choose counting surfaces and chutes that suit the parts and your cleaning procedures.
  • Clear and translucent parts: lighting and image analysis must be set up for low-contrast parts; test your real parts first.
  • Small and static-prone parts: molded parts can cling or clump; see counting overlapping and touching parts.
  • Changeovers: operators can train the counter on new part types, with Sciotex available to help.

Counting medical components?

Send us your parts for a free counting test. Sciotex counting machines store a record for every count, connect to your ERP, and Sciotex can help you plan the validation.

See our counting machines

Frequently asked questions

How do medical device manufacturers count small components?

With automated counting machines that count every piece and store each count with the part, lot, work order, time and operator, rather than estimating by weight.

Can counts be tied to lot records?

Yes. Each count can be recorded with its lot and work order and passed to ERP or manufacturing records systems.

Does a counting machine need validation for medical device use?

Equipment used for quality decisions is generally qualified for its intended use under your quality system: installation checks, operational tests, a performance demonstration and routine verification.

Can clear or translucent parts be counted?

Often, yes, with lighting and image analysis set up for low-contrast parts. A test with your real parts confirms it.

What medical components can be counted?

Small components such as syringe parts, seals, connectors and molded parts are common. Testing your parts is the reliable way to confirm a fit.

Related articles

Written by

Sciotex Engineering

The Sciotex engineering team has designed and built vision, automation and test systems since 1997.

Have an inspection problem to solve?

Talk it through with a Sciotex engineer.

In this article
Have a counting problem to solve?

Talk it through with a Sciotex engineer.

Next step

See your parts counted