Plastic and Molded Part Counting: Static, Tangling and Clear Parts

Written by Sciotex Engineering
In this article

Plastic and molded parts can be counted exactly with an image-based counting machine, even when they are too light, too varied or too static-prone for a counting scale. The usual challenges are parts that cling from static, tangle, nest inside each other, or are clear or colored like the background, and runners or flash that should not be counted as parts.

This article is part of our automated counting guide. It is written for molders, assemblers and distributors who count molded components, caps, clips, plugs and other plastic parts.

In short

  • Light plastic parts are a poor fit for weight counting.
  • Static, tangling and nesting are the main counting problems.
  • Size and shape limits keep flash, runners and fragments out of the count.
  • Test real parts from a production run, not clean samples.

Common challenges with molded parts

ChallengeHow it is handled
Low piece weight and variation between cavitiesCount each piece by image instead of weight
Static clingFeeding and surfaces chosen to reduce cling; parts separated before counting
Tangling (clips, springs, hooks)Gentle separation at the feed; counting from more than one view
Nesting and stacking (caps, cups)Feed rate control; image analysis that detects stacked parts
Clear or color-matched partsLighting chosen for the material, often backlighting
Flash, runners and fragmentsSize and shape limits so only whole parts count

Where molded part counting is used

Choosing a counting approach

Drop zone counting suits bulk counts and bagging; benchtop snapshot counting suits small batches and mixed parts; conveyor counting suits parts already moving on a line. See counting technologies compared for how image-based counting compares with scales, sensors and feeders, and counting overlapping and touching parts for the separation problem in detail.

Counting molded parts by weight?

Send us parts from a production run for a free counting test. Sciotex counting machines count every piece, store a record of each count, and let your team train new part types themselves.

See our counting machines

Frequently asked questions

Can plastic parts be counted automatically?

Yes. Image-based counting machines count each plastic part as a separate object, with feeding and lighting set up for the material and shape.

Why is weight counting unreliable for molded parts?

Plastic parts are light and piece weight varies between cavities and runs, so weight-based estimates lose accuracy on large counts.

How do counting machines handle static-prone parts?

Feeding and contact surfaces are chosen to reduce cling, and parts are separated before they are counted.

Will flash or runners be counted as parts?

Size and shape limits in the image analysis keep fragments, flash and runners out of the count.

Can clear plastic parts be counted?

Usually, with lighting such as backlighting chosen so clear parts contrast with the background. A test with real parts confirms it.

Related articles

Written by

Sciotex Engineering

The Sciotex engineering team has designed and built vision, automation and test systems since 1997.

Have an inspection problem to solve?

Talk it through with a Sciotex engineer.

In this article
Have a counting problem to solve?

Talk it through with a Sciotex engineer.

Next step

See your parts counted