Count-and-Bag: Automating Kit Counting and Bagging

Written by Sciotex Engineering
In this article

An automated count-and-bag system counts each part type to the exact quantity and releases it straight into a bag, box or kit compartment, so kits are complete without hand counting. A counting machine handles the count, a bagger or kit line handles the packaging, and the two are linked so each bag receives exactly one counted batch, with a record and a label for each.

This article is part of our automated counting guide. It goes deeper than our bulk and batch counting article on the kitting side: multi-part kits, bagging and kit verification.

In short

  • Count each part type exactly, then bag; don’t estimate by weight.
  • Link the counter to the bagger so one counted batch goes into one bag.
  • For multi-part kits, count each part type and verify the kit before it seals.
  • Print the label from the count record, not from the order.

Common kitting setups

SetupHow it worksBest for
Counter into hand-held bagOperator holds the bag under the counter’s releaseLow volume, many part numbers
Counter feeding a baggerCounter releases each batch into an automatic bagger that seals and labelsHigh volume, single-part bags
Several counters into one kitEach counter handles one part type; a kit moves past each stationMulti-part hardware kits
Count then verifyParts are counted, then the finished kit is checked before sealingAerospace, medical and other kits that need proof

Linking the counter to the bagger

  • Handshake: the bagger signals “ready”, the counter releases one batch, the bagger confirms and seals. No batch is released without a bag in place.
  • Batch size from the order: the target count comes from the work order or ERP, so changeovers don’t depend on retyping numbers.
  • Labels from the count: the label printer prints the verified quantity, part, lot and date for each bag.
  • Rejects and short batches: if a batch can’t be completed, the system stops and flags it rather than sealing a short bag.

Sciotex counting machines connect to baggers, label printers, scales, ERP and WMS; see connecting a counting machine to ERP, WMS and packing equipment.

Kit accuracy: where errors still get in

  • A part type missed entirely, especially in kits with many components
  • Wrong part in the right quantity, such as a similar-looking screw
  • Parts stuck in the feed path and released into the next bag
  • Manual top-ups when a batch runs short

Counting each part type at its own station and checking the finished kit closes most of these gaps. Where a wrong part is the risk, vision can check part identity as well as count; see error proofing with machine vision.

Sizing the system

  • Bags or kits per hour at peak, and how many part types per kit
  • Part sizes and how they behave: tangling, static, rolling, touching (see counting overlapping and touching parts)
  • Bag or kit format and the bagger you have or plan to buy
  • What records customers require for each kit

Hand counting kits?

Send us your parts for a free counting test. Sciotex counting machines integrate with baggers, label printers and your ERP, keep a record of every count, and are built and supported in the US.

See our counting machines

Frequently asked questions

What is a count-and-bag system?

A count-and-bag system counts parts to an exact quantity and releases each counted batch into a bag or kit, usually linked to an automatic bagger and a label printer.

Can a counting machine connect to an automatic bagger?

Yes. The counter and bagger exchange ready and release signals so each bag receives exactly one counted batch, and the label can print the verified count.

How do you count multi-part hardware kits?

Use a counting station for each part type, or count each part type in sequence, and verify the finished kit before it is sealed.

Is weighing accurate enough for kitting?

Weighing works for uniform parts, but piece-weight variation can cause short or over-filled bags. Counting each piece removes that error.

How fast can count-and-bag run?

It depends on part size and bag format. The counter is rarely the limit; bagger cycle and part feeding usually set the pace.

Related articles

Written by

Sciotex Engineering

The Sciotex engineering team has designed and built vision, automation and test systems since 1997.

Have an inspection problem to solve?

Talk it through with a Sciotex engineer.

In this article
Have a counting problem to solve?

Talk it through with a Sciotex engineer.

Next step

See your parts counted