Automated Vision Inspection
RobotVIEW Robotic Vision Inspection System
High-tolerance inspection for small parts and devices.
RobotVIEW is a fully automated robotic inspection platform for small, high-tolerance parts. It combines machine vision, robotics, precision weighing, 3D scanning and AI to check dimensions, mass and surface defects in one sequence, replacing slow, subjective manual inspection with fast, repeatable, data-driven quality control.
Schedule a Free Inspection Consultation
Robotic Inspection Cell
An Inspection Robot for Small Precision Parts
What is a robotic vision inspection system?
A robotic vision inspection system uses a robot to pick and present each part to cameras, sensors and scales, so every part is measured and inspected the same way without an operator handling it.
RobotVIEW singulates, presents and inspects each unit under test automatically, and is custom engineered to your part geometry, defect types and process. It is one of the benchtop and inline vision inspection machines from Sciotex, designed, programmed and built in-house in the US.
At a glance
- Parts
- Small, high-tolerance metal, ceramic and polymer parts
- Measures
- Length, width, diameter, height, curvature and weight
- Precision
- Micron-level accuracy in suitable configurations
- Operation
- Designed for 24/7 continuous running
Trusted by engineering and quality teams at
How It Works
How Does RobotVIEW Inspect a Part?
RobotVIEW uses a modular, multi-station design, so each measurement happens at a station built for that job. Parallel stations and automated handling keep cycle times short.
The robot picks one part and presents it to the stations.
A high-resolution industrial scale measures its mass.
Structured light or laser triangulation captures the full surface.
High-magnification cameras and telecentric optics measure dimensions and curvature.
AI and tolerance rules combine every result into one pass/fail decision.
Industries
Parts RobotVIEW Inspects
RobotVIEW is configured for your part geometry, materials and inspection requirements, from tiny metal components to molded or machined polymer parts.
Why Robotic Inspection
Benefits of Robotic Vision Inspection
Inspecting small parts by hand means microscopes, calipers and scales used one part at a time, with results that vary by operator. Read how AI defect detection is applied.
Consistent Handling
Automated fixturing and handling remove the variability of manual inspection.
Everything in One Pass
Dimensions, weight and surface defects are checked in a single sequence.
Micron-Level Precision
Telecentric optics and calibrated stations reach micron-level accuracy in suitable setups.
Runs Around the Clock
Industrial-grade components and robust software built for 24/7 operation.
Capabilities and Options
Vision, AI and Measurement Capabilities
Vision software, AI and metrology algorithms turn images and sensor readings into reliable pass/fail decisions.
| Mass | High-resolution industrial scale weighs every part |
|---|---|
| 3D surface and profile | 3D scanners, structured light or laser triangulation |
| Optical gauging | High-magnification cameras and telecentric optics for length, width, diameter and height |
| Vision tools | Pattern matching, edge detection, blob analysis and 3D reconstruction |
| AI classification | Machine learning models for complex surface defects and anomaly detection |
| Tolerance checks | Multi-dimensional checks combining length, diameter, curvature and weight |
| Pass/fail rules | Configurable criteria and grading based on your quality standards |
| Uptime | Industrial-grade components designed for 24/7 operation |
| Data | Results stay on-premise, with no third-party APIs or cloud systems |
Is RobotVIEW right for you?
A robotic inspection cell is often the right fit when:
- Parts are small and tolerances are tight
- Every part needs dimensional, weight and surface checks
- Manual inspection is slow or varies between operators
- Inspection must keep up with production around the clock
Free testing with your parts
Free testing of your sample parts is available to determine the right system configuration. Send us your parts, the defects that matter and your acceptance criteria.
- Dimensional and weight checks
- Surface defect detection
- Cycle time estimates
Measure Every Small Part, Not a Sample
Manual checks on small parts are usually done on a sample, because each part takes minutes under a microscope and on a scale. RobotVIEW measures and inspects every part in one automated sequence. Learn how vision inspection systems work.
Larger parts: for big parts already moving on a conveyor, ConveyorVIEW inspects them inline.
Custom Systems
Custom Robotic Inspection Cells
Sciotex tunes cameras, optics, lighting, scales and algorithms to your tolerances and cycle time, and is one US engineering partner for design, build, integration and ongoing support.
- Stations: weighing, 3D scanning and gauging as your parts need
- Rules: pass/fail criteria and grading set to your standards
- Counting: the same cell can count parts as it inspects them
- Support: design, build, integration and ongoing service
More from Sciotex
Other Vision Inspection Systems
RobotVIEW is for small precision parts. For large parts on a conveyor, benchtop work or warehouse loads, one of these may fit better.
ConveyorVIEW Conveyor Inspection
Inline inspection at up to 60 units per minute.
Pallet Inspection System
3D detection of spill and tip risks on pallets.
Benchtop Vertical 360° Inspection
Rotating 360° inspection of round and tall parts.
Benchtop Horizontal 3D Inspection
Laser 3D scanning for long parts and profiles.
Benchtop Surface Defect Detection
Grading of flat and reflective surfaces.
Compare Every System
See all Sciotex vision inspection machines side by side.
FAQ
RobotVIEW Questions
What is a robotic vision inspection system?
It is an inspection cell where a robot picks and presents each part to cameras, 3D sensors and scales, so every part is measured and inspected automatically and the same way.
What parts can RobotVIEW inspect?
Small, high-tolerance parts such as medical implants and tubing, precision fasteners and valve parts, electronic components and connectors, and aerospace pins, bushings and ceramics.
What does RobotVIEW measure?
Length, width, diameter, height, curvature and weight, along with surface defects found by 3D scanning and AI classification, all in one sequence.
How precise is it?
RobotVIEW can reach micron-level dimensional accuracy in suitable configurations, using high-magnification cameras and telecentric optics.
Can it run continuously?
Yes. It is designed for 24/7 operation with industrial-grade components and robust software.
Can you test our parts first?
Yes. Free testing of your sample parts is available to determine the right system configuration.
Does the system use the cloud?
No. Inspection runs on-premise without third-party APIs or cloud systems, and no subscription or support contract is required.
Additional Resources
Learn More
See Your Parts Inspected by RobotVIEW
Book a free inspection consultation. Free testing of your sample parts is available to find the right configuration.
Links
© Copyright 2026 by Coleman Technologies, Inc. DBA Sciotex