Process Control Example
Powder Feeder Control System with Programmable Feed Profiles
Independent, time-based control of feed rate and heater temperature for two powder feeders.
Sciotex built a control system for the flow of powder from two powder feeders. Over a serial link, the software programs each feeder independently with a target RPM and heater temperature that follow a user-created time profile, and switches feeders to manual control, cleaning mode or on and off as needed, while logging actual RPM and temperature.
Schedule a Free Consultation
Independent control
RPM over time
Temperature profiles
Actual RPM and temperature
Example Overview
Programmable Powder Feeding
Why profile a powder feed rate?
Powder feeders meter material into processes such as thermal spray coating, additive manufacturing and compounding. Many processes need the feed rate to change during a run, for example to ramp up gradually or to grade a coating, and powders often need heating to flow consistently.
This system turns two feeders into a programmable process. Each follows its own time profile for RPM and heater temperature, profiles can be saved and reused, and the actual values are logged so the run can be verified against the plan.

At a glance
- Equipment
- Two powder feeders
- Interface
- Serial communication protocol
- Controlled
- Feed RPM, heater temperature, cleaning cycle
- Profiles
- User-created, saved and loaded from file
- Records
- Actual RPM and temperature logged; printable
Trusted by engineering and quality teams at






How It Works
How the Powder Feed Control Works
Each feeder follows its own profile, with the software handling communication, switching and records.
RPM and temperature steps over time.
Targets sent to each feeder over serial.
Feeders follow their profiles independently.
Manual control, cleaning or on/off as needed.
Actual values recorded and printed.
What the System Does
Software Built for Repeatable Feeding
Saved profiles and logged results make powder-fed processes repeatable.
Independent feeders
Each feeder runs its own profile.
Reusable profiles
Saved, edited and loaded from file.
Cleaning and manual modes
Maintenance without leaving the software.
Printable records
Profiles and acquired data printed for the record.
Hardware and Software
System Capabilities
See the process control guide for more on recipe-driven control.
| Feeders | Two, independently programmable |
|---|---|
| Communication | Serial protocol |
| Feed control | Target RPM following a time profile |
| Heater control | Temperature following a time profile |
| Modes | Automatic, manual, cleaning, on/off |
| Data | Actual RPM and temperature logged and printable |
Where programmable feeding helps
Profile-driven feeding suits processes such as:
- Thermal spray coating
- Powder-based additive manufacturing
- Compounding and blending
Need equipment control software?
Sciotex builds control software that ties process equipment together over serial and networked links.
Additional Resources
Learn More
Controlling Feeders or Process Equipment?
Talk to a Sciotex engineer about process equipment control and logging.