Automation ROI: How to Calculate Payback on Manufacturing Automation

Written by Sciotex Engineering
In this article

Automation ROI is the return a manufacturing automation project earns on what it costs to install. Most manufacturers look at it two ways: payback, the number of months until savings cover the installed cost, and ROI, the total return over the life of the system as a percentage of that cost. This article shows where the savings come from, how to calculate both numbers, a worked example, and which automation sub-systems usually pay back fastest.

Where automation savings come from

Labor is the obvious saving, but it is rarely the only one, and often not the biggest. A realistic ROI estimate counts five sources:

Savings
Labor
Hours of manual counting, checking, loading and testing moved to work that needs judgment.
Savings
Scrap and rework
Defects caught at the station, before more value is added to a bad part.
Savings
Quality escapes
Fewer defective parts reaching customers, with the returns, credits and lost business they cause.
Savings
Throughput
A station that runs at line rate stops being the bottleneck, so the whole line produces more.
Savings
Data
Time-stamped results that make process problems visible and faster to fix.

Automation also improves speed, quality and consistency at the same time. A manual inspection step slows the line, misses defects as people tire, and varies from shift to shift. An automated station checks every part the same way at line speed and records the result, which is why quality gains often outweigh the labor savings on inspection projects.

How to calculate automation ROI and payback

Payback (months) = installed cost ÷ monthly savings
ROI over N years (%) = (annual savings × N − installed cost) ÷ installed cost × 100

Installed cost should include everything needed to get the system running: engineering, equipment, integration, installation, downtime during changeover and training. Monthly savings should come from your own numbers: today’s labor hours, scrap and rework cost, escape cost and lost throughput, measured honestly over a few months.

A worked example

Take a manual counting and inspection step staffed by one operator on each of two 8-hour shifts, 21 working days a month.

ItemCalculationMonthly
Labor hours2 shifts × 8 hours × 21 days336 hours
Labor cost336 hours × $25 loaded rate$8,400
Scrap and reworkHalf of $1,500 a month avoided by catching defects at the station$750
Total savings$9,150

That is $109,800 a year. At this savings rate, every $100,000 of installed cost pays back in about 11 months (100,000 ÷ 9,150 = 10.9), and returns about 229% over three years. The example leaves out quality escapes and added throughput, which often make the real figure better.

Which automation sub-systems pay back fastest

Not all automation pays back at the same rate. These five sub-systems are where manufacturers most often find a strong return, because they replace repetitive, measurable work.

Sub-systemWhere the savings come fromWhat drives payback
Automated countingLabor, miscounts, give-away of extra partsVolume and how many people count today. On Sciotex projects, payback can be a few weeks.
Automated inspection and machine visionLabor, scrap, escapes, dataDefect cost and escape cost. On Sciotex vision projects, payback is typically 7–12 months.
Automated test equipmentTest time, consistency, recordsUnits per day and how long manual test takes
Robotic pick and placeLabor, ergonomics, throughputShifts run and how repetitive the handling is
Data acquisition and process monitoringFewer failed batches, faster developmentCost of a failed run and how often it happens

Costs that are easy to leave out

  • Engineering and design time, not just hardware
  • Fixtures, guarding and changes to the line or floor
  • Production lost during installation and ramp-up
  • Operator and maintenance training
  • Spare parts and ongoing support
  • Changes for new part numbers over the system’s life

For planning the spend over time, see budgeting for industrial automation projects.

Mistakes that make ROI estimates wrong

  • Counting labor only. Scrap, escapes and throughput are often worth more.
  • Using ideal numbers. Base savings on measured performance, not a best-case shift.
  • Ignoring false rejects. An inspection system that rejects good parts erodes the saving.
  • Skipping feasibility. A system that cannot hit its rate or accuracy has no ROI. Testing real parts first protects the estimate.
  • Forgetting change. Products change; a system that is hard to update loses value over time.

Improving the return

The best way to improve automation ROI is to pick the right target. Repetitive, high-volume tasks with measurable errors pay back fastest. See what to automate first, and once you have a candidate, talk to an industrial automation company that will test your parts before you commit.

Frequently asked questions

How do you calculate automation ROI?

Add up the monthly savings from labor, scrap and rework, quality escapes and added throughput. Payback in months is the installed cost divided by monthly savings. ROI over N years is annual savings times N, minus installed cost, divided by installed cost.

What is a good payback period for automation?

It depends on your company’s investment targets and the life of the product. On Sciotex projects, counting machines can pay back in a few weeks and vision systems typically in 7–12 months.

Does automation ROI only come from labor savings?

No. Scrap and rework, quality escapes that reach customers, added throughput and better process data are often worth as much as or more than the labor saved.

What costs should be included in an automation ROI calculation?

Engineering, equipment, fixtures, integration, installation and lost production during changeover, training, spare parts and support, plus changes for new part numbers over the system’s life.

Related articles

Written by

Sciotex Engineering

The Sciotex engineering team has designed and built automation, vision and test systems since 1997.

Have an automation project to plan?

Talk it through with a Sciotex engineer.

In this article
Planning an automation project?

Talk it through with a Sciotex engineer.

Next step

See what custom automation could do on your line