• Mon - Fri: 8.00 am - 5.00 pm EST

610-459-9646
[email protected]

ATE - Automated Test Equipment

Icon

Automated Test Equipment - ATE Systems

Automated Fiber Optic Inspection System

Optical Fiber Inspection System

Identifies defects in fiber optic material during manufacturing on a draw tower. This high resolution system uses two line-scan cameras mounted at 90 degrees to each other, each equipped with a microscope objective. 

Gasket Inspection System (GIS)

The Gasket Inspection System (GIS) automates the inspection of gaskets for defects including excess flash, blisters, tears and under cure. The GIS quantifies the magnitude of gasket flaws in each part in less than 2 seconds while each gasket is …

Extrusion Vision Inspection System (EVIS)

The Extrusion Visual Inspection System (EVIS) automates the inspection and defect analysis of long rectangular extrusions, either as 6 to 8 foot long pieces (offline mode) or as one continuous extrusion (inline mode). The EVIS quantifies the magnitude of extrusion …

Cable Test System

This production test system inspects cable end connection reflections using National Instruments high speed digitizers and pulse sources.

Watlow & Eurotherm Reactor Systems

Sciotex has developed numerous small reactor systems utilizing Watlow and Eurotherm controllers to control temperature, pressure, flow, and other parameters.

Automated Gas Tester

Qualifies the purity of mixed gas cylinders using FTIR equipment, valves, flow meter/controllers and stores the analysis information to a local relational database and to a networked database server.

Automotive Test System

A test system which reads and logs data from an automotive computer.

Environmental Chamber Test System

An automated test system for environmental testing of air conditioning equipment.

ASIC Test System

A production-class system for functional testing of custom integrated circuits.

Gyro Test System

System to control the filling and testing of ring laser gyroscopes, using high-speed digital and analog test data.

Chip Inspection System

Measures the uniformity, size, and shape, as well as searches for defects in the plating of the connectors of electronic components. Each Unit Under Test (UUT) is compared to a known good part for that particular model number.

Relay Testing System

Production and verification systems for testing a wide variety of relay protection devices used by the electric power industry.

Wafer Probing System

R & D system used to automate collection of test data taken from semiconductors.

Electronic Connector Test System

Production automated test system for the functional testing of electrical connectors.

Need a Consultation?

Save Time and Money with an Engineered Solution from Sciotex