LabVIEW for Process Control: When It Fits and How to Build It

Written by Sciotex Engineering
In this article

LabVIEW is a good choice for process control when the process needs flexibility, high-speed data or custom instrument integration, as in pilot plants, R&D processes and specialized production equipment. Running on NI real-time hardware such as CompactRIO, LabVIEW handles deterministic PID loops, sequences and interlocks, while a host application provides operator screens, recipes and data logging. For large, fixed continuous plants, a DCS or PLC is usually the better fit.

This article is part of our guide to industrial process control, which compares LabVIEW and PC-based real-time control with PLC, DCS and SCADA platforms.

Where LabVIEW fits in process control

Use LabVIEW when…Use a PLC or DCS when…
Recipes, sequences and equipment change often, as in a pilot plantThe process is fixed and will run unchanged for years
High-rate data is as important as controlStandard I/O rates and a historian are enough
You must integrate analyzers, instruments or custom hardwareDevices are standard field instruments on standard networks
Custom algorithms, models or signal processing are neededStandard PID and sequence blocks cover the control
Engineers will evolve the system themselvesPlant maintenance standardizes on one PLC or DCS platform

A typical LabVIEW process control architecture

  1. FPGA layer (optional): hardware-timed I/O, very fast loops and fast hardware interlocks, running independently of any operating system.
  2. Real-time layer: a CompactRIO or other NI real-time controller runs the PID loops, sequences and software interlocks at a fixed rate, and keeps running if the host PC fails.
  3. Host layer: a Windows application for operator screens, recipe editing, alarms, trends and data logging.
  4. Safety layer: hard-wired trips or a safety PLC, independent of all LabVIEW code.

The same pattern has decades of history: Sciotex developed the SCADA system for an ethylene oxide pilot plant on NI Compact FieldPoint real-time hardware, the predecessor of today’s CompactRIO.

Core LabVIEW tools for process control

  • PID and fuzzy logic functions: PID with anti-windup, bumpless transfer, setpoint ramping and autotuning helpers.
  • Real-time timed loops: deterministic loop rates with priorities, so a control loop is never starved by logging or communication.
  • State machines and queued message handlers: clean structures for sequences, phases and operator commands.
  • Data logging: TDMS files for high-rate data, and connections to databases or historians for long-term storage.
  • Industrial communication: Modbus, OPC UA, EtherNet/IP and serial drivers to connect PLCs, controllers, drives and analyzers.

Loop timing on real-time hardware

Worked example: choosing loop rates

Temperature loops. A reactor temperature loop with a 30 s dead time needs to run only every 1–3 s; 1 s is typical.

Flow and pressure loops. With dead times around 0.5 s they should run every 50–100 ms, comfortably within a real-time controller.

Fast hardware interlocks. Detecting an overpressure in microseconds, or controlling a power stage at 10 kHz (every 100 µs), belongs on the FPGA, which runs the logic in hardware and does not depend on the processor.

The host. Screens update every 0.5–1 s and logging runs in its own loop. None of the control should depend on the host PC.

For tuning those loops, see PID tuning for process loops.

Integrating LabVIEW with plant systems

  • Read and write PLC tags over Modbus TCP, EtherNet/IP or OPC UA, so a LabVIEW supervisory layer can sit over existing PLCs.
  • Publish data to a plant historian or database for long-term storage.
  • Connect analyzers and laboratory instruments over serial, Ethernet or GPIB, often the reason LabVIEW is chosen.
  • Exchange recipes and batch results with lab or business systems.

Challenges and how to handle them

  • Maintainability: LabVIEW makes it easy to build quickly and hard to maintain carelessly. Use a defined architecture, source control and code reviews, and document the design.
  • Skills: plant technicians may know PLCs, not LabVIEW. Provide documentation, training and remote support, or use a PLC for the parts technicians must change.
  • Safety: keep safety functions in independent hardware, never only in LabVIEW code.
  • Lifecycle: plan hardware and software versions, spares and upgrades for the life of the system.

If you are comparing platforms, our DCS vs PLC vs SCADA article covers the alternatives, and pilot plant control systems explains why flexible platforms suit pilot work.

Considering LabVIEW for process control?

Sciotex is an NI and LabVIEW integrator, with Certified LabVIEW Developers and Architects who have built real-time process control and data systems since 1997.

Explore custom process control

Frequently asked questions

Can LabVIEW be used for process control?

Yes. Running on NI real-time hardware such as CompactRIO, LabVIEW runs deterministic PID loops, sequences and interlocks, and is widely used for pilot plants, R&D processes and specialized production systems.

Is LabVIEW better than a PLC for process control?

Neither is better in general. LabVIEW suits processes that need flexibility, high-rate data and custom integration; a PLC suits fixed processes where plant technicians maintain the system on a standard platform. Many systems combine both.

Does LabVIEW have a PID controller?

Yes. LabVIEW includes PID functions with anti-windup, bumpless transfer and setpoint ramping, for both real-time controllers and FPGA targets.

Should process control run on a Windows PC?

Control loops should run on a real-time controller or PLC, not on a Windows PC, so that control continues if the PC freezes or restarts. The PC is best used for screens, recipes and logging.

Can LabVIEW communicate with PLCs?

Yes. LabVIEW communicates with PLCs over Modbus, OPC UA, EtherNet/IP and other protocols, so it can supervise or work alongside existing PLC-based systems.

Related articles

Written by

Sciotex Engineering

The Sciotex engineering team has designed and built industrial, test and scientific software since 1997.

Have a software project or legacy system?

Talk it through with a Sciotex engineer.

In this article
Need help with industrial software?

Talk it through with a Sciotex engineer.

Next step

See what modern, supportable software could do for your system